Class 90 DCC Loco-Decoder with Servo Motor Operation & Brake function

厂商原文

A 21 Pin (21MTC) DCC Decoder configured for use in the Bachmann Branchline Class 90 – models produced from 2021 onwards . Configured to control the servo-motor-operated Pantograph. Highlights include: Dual-mode DCC/DC decoder with Back EMF function 1.2A continuous load Brake Button function for realistic control of braking Controls the servo-motor-operated Pantograph Default Functions when fitted to Bachmann Branchline Class 90 F0 - Direction Lights on/off F1 - Cab Lights (Directional) on/off F2 - Brake Button F3 - Day/Night Mode F4 - Direction Lights Off (Non-Pantograph End) F5 - Direction Lights Off (Pantograph End) F6 - Pantograph Up/Down Operating Modes NMRA/DCC with 14, 28 and 128 speed steps Short and Long addresses DCC and DC operation (DC operation is de-selectable) Motor Control Features 1.2A continuous load Variable pulse width frequency motor regulation (up to 40kHz) Motor output overload protection; Back EMF (de-selectable) Function Outputs Pre-configured to operate lights and servo-motor-controlled Pantograph Dimensions 20.5mm x 15.5mm x 3.5mm Default Address Address 3 Programming DCC Service Mode & DCC PoM (Programming on Main) Additional Features RailCom® Feedback system Capacitor connections This decoder is manufactured on behalf of Bachmann Europe by Zimo. For full technical specifications and instructions, please refer to the Zimo user guide for MX634C at http://www.zimo.at/web2010/documents/MX-small-decoders_EN.pdf

厂商发布的英文原文。