SubTerrain T-Trak Straight Kit

厂商原文

Kato and Woodland have teamed up with a brand new project to make it easier than ever for modelers to get into scenery and layout building, thanks to T-Trak(TM) and UNITRAK! Kato USA will be distributing special T-Trak module kits, made by Woodland using their SubTerrain Lightweight Layout System! Each SubTerrain T-Trak kit is made from lightweight, sculpt-able foam with wooden reinforcements that make them easy to assemble, transport, and shape into your desired form! Included in each set are a variety of sculpting aides, like a Woodland Shaper Sheet and sculpting plaster, as well as all the tools you need to assemble the completed module kit even glue, and of course, Kato UNITRACK! Learn more about the T-Trak module system of standards here: www.ttrak.org   Modules are available in Straight and Corner variations, and are designed to T-Trak standards to allow multiple modules to snap together using the power of Kato Uni-Joiners. Thanks to the standardized dimensions, these kits can be connected to any existing of future T-Trak modules, whether they're built using these kits or not! One of the big advantages of using the SubTerrain foam system is that it allows building not scenery not only above but also below the level of the track - a difficult venture using an all-wood structure. This type of module can be easily built by modelers of any skill level thanks to the easily worked materials! By combining easy to assemble and sculpt terrain tools with the reliability of Kato UNITRACK, Kato and Woodland have made a modular kit system that can be enjoyed by anyone, whether it's during the building, painting, and decorating process, or during operation when combining multiple modules into a decorated layout! Straight: 9 3/4" Concrete Tie + 2 7/16" Concrete Tie Feeder Track Straight: Special T-Trak Double Track feeder cable Corner: 12 3/8"-11" Concrete Tie Curve + 2 x 12 3/8"-11" Concrete Tie Easement Curves 2 x 10oz bags of Shaper Sheet Plaster 1 x 18" x 24" Woodland Shaper Sheet 1 x Bottle Foam Tack Glue 1 x Roll of 25 Sticky Dots 1 x Riser Assembly 2 x Masonite Support boards 4 x Leveling Bolts 12 x 2" Foam Nails 4 x Side Profile Boards 2 x Base Board Supports Instruction Sheet These T-Trak module kits come unassembled and will need to be put together. They include most materials needed for assembly and do include Kato UNITRACK, but other tools such as glue, a hot wire cutter, screwdriver, and brushes (for applying plaster) will assist with assembly and decoration. See the instructions for details.

厂商发布的英文原文。